 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| TLP260J TOSHIBA Photocoupler GaAs IRED + Photo-Triac TLP260J Triac Drivers Programmable Controllers AC-Output Modules Solid-State Relays The TOSHIBA mini-flat coupler TLP260J is a small-outline coupler suitable for surface mount assembly. The TLP260J consists of a photo-triac optically coupled to a gallium arsenide infrared-emitting diode. * * * * * * Peak off-state voltage Trigger LED current On-state current Isolation voltage UL-recognized Option (V4) type VDE-approved Highest permissible overvoltage :EIN EN 60747-5-2 satisfied :6000 Vpk TOSHIBA Weight: 0.09 g 11-4C1 Maximum operating insulation voltage :565 VpK : 600 V (min) : 10 mA (max) : 70 mA (max) : 3000 Vrms (min) : UL1577, file No. E67349 Unit: mm Note: When an EN 60747-5-2 approved type is needed, be sure to specify "Option (V4)". * Construction Mechanical Rating Creepage distance Clearance Insulation thickness : 4.0 mm (min) : 4.0 mm (min) : 0.4 mm (min) Trigger LED Current Trigger LED Current (mA) Classification* VT = 6 V, Ta = 25C Min Standard Max 10 Product Classification Marking Blank Pin Configuration 1 6 3 1. Anode 3. Cathode 4. Terminal 1 6. Terminal 2 4 Note: Be sure to use standard product type names when submitting type names for safety certification testing, i.e., TLP260J. 1 2007-10-01 TLP260J Absolute Maximum Ratings (Ta = 25C) Characteristic Forward current Forward current derating (Ta 53C) LED Peak forward current (100 s pulse, 100 pps) Reverse voltage Junction temperature Off-state output terminal voltage On-state RMS current Detector Ta = 25C Ta = 70C Symbol IF IF / C IFP VR Tj VDRM IT(RMS) IT / C ITP ITSM Tj Tstg Topr Tsol (Note 1) BVS Rating 50 -0.7 1 5 125 600 70 40 -0.67 2 1.2 100 -55~125 -40~100 260 2500 Unit mA mA / C A V C V mA mA / C A A C C C C Vrms On-state current derating (Ta 25C) Peak on-state current (100 s pulse, 120 pps) Peak nonrepetitive surge current (PW = 10 ms, DC = 10%) Junction temperature Storage temperature range Operating temperature range Lead soldering temperature (10 s) Isolation voltage (AC, 1 min., R.H. 60%) Note: Using continuously under heavy loads (e.g. the application of high temperature/current/voltage and the significant change in temperature, etc.) may cause this product to decrease in the reliability significantly even if the operating conditions (i.e. operating temperature/current/voltage, etc.) are within the absolute maximum ratings. Please design the appropriate reliability upon reviewing the Toshiba Semiconductor Reliability Handbook ("Handling Precautions"/"Derating Concept and Methods") and individual reliability data (i.e. reliability test report and estimated failure rate, etc). Note 1: Device considered as a two-terminal device: Pins 1 and 3 shorted together and pins 4 and 6 shorted together. Recommended Operating Conditions Characteristic Supply voltage Forward current Peak on-state current Operating temperature Symbol VAC IF ITP Topr Min 15 -25 Typ. 20 Max 240 25 1 85 Unit Vac mA A C Note: Recommended operating conditions are given as a design guideline to obtain expected performance of the device. Additionally, each item is an independent guideline respectively. In developing designs using this product, please confirm specified characteristics shown in this document. 2 2007-10-01 TLP260J Individual Electrical Characteristics (Ta = 25C) Characteristic Forward voltage LED Reverse current Capacitance Peak off-state current Peak on-state voltage Detector Holding current Critical rate of rise of off-state voltage Critical rate of rise of commutating voltage Symbol VF IR CT IDRM VTM IH dv / dt Test Condition IF = 10 mA VR = 5 V V = 0, f = 1 MHz VDRM = 600 V ITM = 70 mA Vin = 240 Vrms, Ta = 85C (Fig. 1) Min 1.0 Typ. 1.15 30 10 1.7 1.0 500 Max 1.3 10 1000 2.8 Unit V A pF nA V mA V / s dv / dt(c) IT = 15 mA, Vin = 60 Vrms (Fig. 1) 0.2 V / s Coupled Electrical Characteristics (Ta = 25C) Characteristic Trigger LED current Turn-on time Symbol IFT tON VT = 6 V VD = 64 V, RL = 100 IF = rated IFT x 1.5 Test Condition Min Typ. 5 30 Max 10 100 Unit mA s Isolation Characteristics (Ta = 25C) Characteristic Capacitance input to output Isolation resistance Symbol CS RS Test Condition VS = 0, f = 1 MHz VS = 500 V, R.H. 60% AC, 1 minute Isolation voltage BVS AC, 1 second, in oil DC, 1 minute, in oil Min 5x10 10 Typ. 0.8 10 14 Max Unit pF Vrms Vdc 3000 5000 5000 Fig. 1: dv / dt test circuit Rin VCC + 120 1 3 6 4 Vin RL 4k 5 V, VCC 0V dV / dt (c) dV / dt 3 2007-10-01 TLP260J IF - Ta 60 120 IT(RMS) - Ta 50 100 Allowable forward current IF (mA) R.M.S. on-state current IT(RMS) (mA) 0 20 40 60 80 100 120 40 80 30 60 20 40 10 20 0 20 0 20 0 20 40 60 80 100 120 Ambient temperature Ta (C) Ambient temperature Ta (C) IFP - DR 3000 Pulse width 100 s Ta = 25C 50 1000 500 100 Ta = 25C IF - V F Allowable pulse forward Current IFP (mA) (mA) IF Forward current 100 30 10 5 3 100 1 0.5 0.3 0.1 0.6 50 30 10 3 103 3 102 3 101 3 0.8 1.0 1.2 1.4 1.6 2.0 Duty cycle ratio DR Forward voltage VF (V) VF / Ta - IF 3.2 1000 IFP - VFP 500 300 Forward voltage temperature coefficient VF / Ta (mV / C) 2.8 2.4 2.0 1.6 1.2 IFP (mA) Pulse forward current 100 50 30 10 5 3 1 0.6 Pulse width 10 s Repetitive frequency = 100 Hz Ta = 25C 0.8 0.4 0.1 0.3 1 3 10 30 50 1.0 1.4 1.8 2.2 2.6 3.0 Forward current IF (mA) Pulse forward voltage VFP (V) 4 2007-10-01 TLP260J Normalized IFT - Ta 3 2 VT6V 2 3 Normalized IH - Ta Trigger LED current IFT (arbitrary unit) Holding current IH (arbitary unit) 20 0 20 40 60 80 100 1.2 1 1.2 1 0.5 0.3 0.5 0.3 0.1 40 0.1 40 20 0 20 40 60 80 100 Ambient temperature Ta (C) Ambient temperature Ta (C) Normalized IDRM - Ta 103 VDRM=Rated 1.4 Normalized VDRM - Ta 102 Off-state output terminal voltage VDRM (arbitrary unit) 1.2 Peak off-state current IDRM (arbitrary unit) 1.0 0.8 10 1 0.6 0.4 100 0 0.2 40 0 20 40 60 80 100 0 20 40 60 80 100 20 Ambient temperature Ta (C) Ambient temperature Ta (C) Normalized LED Current LED Current Pulse Width 10 Normalized LED current IF / IFT 5 3 2 1.8 1.6 1.4 1.2 1 10 30 50 100 300 500 1000 LED current pulse width Pw (s) 5 2007-10-01 TLP260J RESTRICTIONS ON PRODUCT USE * The information contained herein is subject to change without notice. 20070701-EN * TOSHIBA is continually working to improve the quality and reliability of its products. Nevertheless, semiconductor devices in general can malfunction or fail due to their inherent electrical sensitivity and vulnerability to physical stress. It is the responsibility of the buyer, when utilizing TOSHIBA products, to comply with the standards of safety in making a safe design for the entire system, and to avoid situations in which a malfunction or failure of such TOSHIBA products could cause loss of human life, bodily injury or damage to property. In developing your designs, please ensure that TOSHIBA products are used within specified operating ranges as set forth in the most recent TOSHIBA products specifications. Also, please keep in mind the precautions and conditions set forth in the "Handling Guide for Semiconductor Devices," or "TOSHIBA Semiconductor Reliability Handbook" etc. * The TOSHIBA products listed in this document are intended for usage in general electronics applications (computer, personal equipment, office equipment, measuring equipment, industrial robotics, domestic appliances, etc.).These TOSHIBA products are neither intended nor warranted for usage in equipment that requires extraordinarily high quality and/or reliability or a malfunction or failure of which may cause loss of human life or bodily injury ("Unintended Usage"). Unintended Usage include atomic energy control instruments, airplane or spaceship instruments, transportation instruments, traffic signal instruments, combustion control instruments, medical instruments, all types of safety devices, etc.. Unintended Usage of TOSHIBA products listed in his document shall be made at the customer's own risk. * The products described in this document shall not be used or embedded to any downstream products of which manufacture, use and/or sale are prohibited under any applicable laws and regulations. * The information contained herein is presented only as a guide for the applications of our products. No responsibility is assumed by TOSHIBA for any infringements of patents or other rights of the third parties which may result from its use. No license is granted by implication or otherwise under any patents or other rights of TOSHIBA or the third parties. * GaAs(Gallium Arsenide) is used in this product. The dust or vapor is harmful to the human body. Do not break, cut, crush or dissolve chemically. * Please contact your sales representative for product-by-product details in this document regarding RoHS compatibility. Please use these products in this document in compliance with all applicable laws and regulations that regulate the inclusion or use of controlled substances. Toshiba assumes no liability for damage or losses occurring as a result of noncompliance with applicable laws and regulations. 6 2007-10-01 |
Price & Availability of TLP260J07
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |